PS9200KIT with SC1 Case
The PS9200KIT is a complete
IEC61094-4 compliant measurement microphone system. Housed in an ABS custom die-cut foam case (SC1) the PS9200KIT is an excellent choice for field applications.
The heart of the KIT is the 1/2 inch
IEC61094-4 compliant measurement microphone. A selection of 4 different 1/2 inch capsules is offered. These include models with frequency responses to 40 kHz, noise floors of 12 dBA, and maximum input limits (3% THD) of 160 dBSPL in both free field and pressure versions. Microphone sensitivities range from 12 to 50 mV/Pa.
Each KIT also includes the PS9200 - 2 channel precision microphone power supply, AC adapter (110 or 220 Vac), 4012 - 1/2 inch preamp with cable , WS1 windscreen, and the SC1 storage case. The package is offered at a savings off the individual item pricing. The SC2 - locking case is available as an option.
ACO Pacific's full line of options like the "G" gain stage option for use with board level analyzers are available at the catalog price. Other microphone selections may also be substituted based on the relative catalog prices.
Applications include loudspeaker testing, architectural acoustics, product testing, preventative maintenance, automobile and aircraft testing, and regulatory compliance testing. The PS9200KIT provides a microphone system traceable to US and International standards.
PS9200Kit Includes:
- PS9200 - 2 Channel Power Supply
- 4012 - 1/2 Inch Preamplifier w/CA4012-5 Preamp Cable
- PS9 (110Vac) or PS29 (220Vac) Adaptor
- WS1 - 3 inch Windscreen
- SC1 - Fitted Storage Case
- AND your selection of a: 1/2 Inch
IEC61094-4 compliant Measurement Mic - See Below
Microphone Selections - Standard with PS9200KIT
Measurement Mics - Detailed Specifications
Free Field Microphones -
Model 7012
- Freq Response: 2 Hz to 40 kHz
- Sensitivity: 15 mV/Pa
- Dynamic Range
Noise Floor: <20 dBA
3% THD: 160 dBSPL
Model 7046/7047
- Freq Response: 2 Hz to 20 kHz
- Sensitivity: 50 mV/Pa
- Dynamic Range
Noise Floor: 14 dBA
3% THD: 145 dBSPL
Pressure Response -
Model 7013
- Freq Response: 2 Hz to 20 kHz
- Sensitivity: 12.5 mV/Pa
- Dynamic Range
Noise Floor: 20 dBA
3% THD: 160 dBSPL
Model 7046
- Freq Response: 2 Hz to 10 kHz
- Sensitivity: 30 mV/Pa
- Dynamic Range
Noise Floor: 16 dBA
3% THD: 145 dBSPL
Options Available for an additional charge -
- The complete line of ACO Pacific 1 inch through 1/4 inch measurement microphones and preamp adaptors is available. Measurement Mics - Detailed Specifications
- PS9200 Power Supply
- "Lemo" Connector - Hewlett Packard, Norsonics and B&K pinout. 2 channel and 4 channel versions are available as an option
- Gain Option GXXXX - 2 Independent Gain Stages
- 50 Volt Preamp Power option
- 511E SPL Calibrator
- SC2 - Locking Case
- PS92IEPE4
S17KIT
The SI7 and SI7KIT provide a rugged, versatile, and cost-effective approach to sound intensity probes and hardware. The Side by Side configuration - described in IEC1043 - utilizes standard ACO Pacific preamps and power supplies. 
The basic microphone system may be used for many conventional acoustic measurements. Microphone spacing is continuously adjustable (no spacers to get lost) from 12.5 mm to a maximum of 100 mm (for enhanced low frequency performance). The spacing may be optimized for the band of interest. A convenient tripod mounting permits easy permanent installation on a production line or use of a camera style grip for hand-held use.
The SI7KIT is a complete microphone system including: SI7 probe holder; choice of 1/2 inch Phased Matched Pairs; 2 - 4012 preamps and cables; PS9200 Two Channel Power Supply; AC Adapter; and the SC1 fitted storage case.
Sound Intensity (Acoustical Intensity) permits accurate source location and measurement of sound sources in highly reverberant environments. Applications include measurement of: fan noise, speaker cabinet sound radiation; heavy equipment noise; materials testing; and profiling horn drivers. The side by side configuration allows measurements to within a few millimeters of a working surface like speaker cones or tires.
SI7KIT Kit Includes:
- SI7 Probe Holder
- Rugged Side by Side Configuration Per IEC1043
- Up to 100 mm Mic to Mic Spacing
- 18 Inch Extension W/Tripod Mount
- 7012PM or 7046I Phase Matched Mic Pair
- 2 - 4012 Mic Preamps w/CA4012-5 Cables
- PS9200 - 2 Channel Power Supply
- PS9 (110Vac) or PS29 (220Vac) AC Adaptor and
- SC1 Fitted Storage Case SC2 - Locking Case Optional
- Holds PS9200, Preamps/Cables, Microphones, AC Adaptor
- 511E (Optional), Other Accessories, and your BNC Cables
The Alternative Family of
IEC61094-4 compliant Mic Capsules - 1", 1/2", and 1/4" Pressure & FF - Unmatched Measurement Mics - Detailed Specifications
Phase Matched Pairs - Available with SI7KIT
- 7012PM - (see 7012 above)
- 7046I - (see 7046 above)
- Matched Pair Specifications
Phase Matching
- 31.5 Hz to 1 kHz less than 0.2 degrees
- 1 kHz - 0.05 degrees typical
- 5 kHz - 1.0 degrees typical
Amplitude Matching
- 5 Hz to 12.5 kHz - 0.5 dB
- 0.3 dB typical
